- 您现在的位置：买卖IC网 > Sheet目录321 > DM300024 (Microchip Technology)KIT DEMO DSPICDEM 1.1
dsPICDEM? 1.1 Plus Development Board User’s Guide
3.4.3
3.4.3.1
Interrupts Used in the Demo
EXTERNAL INTERRUPTS TO MAIN ROUTINE
External interrupts INT1-INT4 are controlled by switches SW1-SW4.
These switches provide selection capabilities for the demo program. The most recent
switch presses are recorded in a variable within the interrupt routines. In the main
routine, the variable is analyzed to determine what action is requested by the recent
switch event.
3.4.3.2
DCI INTERRUPTS AND DTMF
The DCI module interrupts the CPU when all four TXBUF registers have been
transmitted. The DCI is used to send out DTMF tones to the Codec. The tonal
components are stored as sinusoid tables in program memory and accessed using
Program Space Visibility (PSV).
The DCI ISR keeps track of the number of samples sent. The DTMF tones are
transmitted by adhering to International Telecommunication Union (ITU-T)
specifications. For example, the ON time for tones is greater than 40 mS and the OFF
time is less than 23 mS. The actual values are 100 mS of ON time and 15 mS of OFF
time. When playing a pre-recorded sequence of tones, a PAUSE time is added
between successive tones. This time is equal to the ON time of the tone. Also, the high
and low frequency of the DTMF tone are separated by 8 dB. The high frequencies are
reduced in magnitude relative to the low frequencies by 8 dB.
3.4.3.3
UART RECEIVE INTERRUPTS
Single DTMF tones may also be played by entering numeric characters (0-9) on the PC
keyboard during the HyperTerminal session. The UART receives this keyboard
character, and a receiver interrupt communicates this data to the DCI to start a tone
generation process.
3.4.3.4
UART TRANSMIT INTERRUPTS
Every 1.14 seconds, data is transmitted via the UART to the HyperTerminal session
window. Four bytes are loaded at a time in the Transmitter Buffer registers. The term
“data” refers to the following:
?
?
?
?
?
Analog data such as RP1, RP2 and RP3
Temperature sensor data
FFT frequency and bin number of the sampled input sine-wave signal
Cycle count information for the FFT, FIR or IIR algorithms
Chosen Filter Type – IIR, FIR or None
3.4.3.5
SPI INTERRUPTS, DIGITAL POT AND THE LCD CONTROLLER
The SPI 2 module is used to perform two functions:
? When the demo code is waiting for the ADC to collect 256 samples of data on pin
AN3, the SPI 2 module is used by the Timer1 ISR to transmit sine-wave samples
to the MCP41010 every 125 microseconds at a data rate of 230 kHz.
? When code execution reaches the DSP stage (i.e., filtering, FFT etc.) the SPI 2
module is used to send data to the PIC18F242 LCD controller on the expansion
board at a data rate of 921.6 KHz (F CY /8). The LCD has a 4 row x 20-character
display. All 80 characters are refreshed by the SPI 2 module.
DS70099D-page 38
? 2006 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
DM330012
KIT USB STARTER FOR DSPIC33E
DM330013
MICROSTICK DSPIC33F/PIC24H BOARD
DNET1
SURGE SUPPRESSOR ETHERNET RJ45
DR-8094
RACK DOUBLE 84"X20.25"X36" BLK
DR-IAC5E
INPUT MODULE AC 5VDC
DRIDC24A
INPUT MODULE DC 34MA 24VDC
DRODC24
OUTPUT MODULE DC 13MA 24VDC
DRR-40A
MODULE REDUNDANCY 40A DIN RAIL
相关代理商/技术参数
DM300027
功能描述:开发板和工具包 - PIC / DSPIC 16-bit Starter Demo Board RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM-3-000-K
制造商:PacTec 功能描述:Case, Plastic; ABS; Black; 11.46 in.; 3.38 in.; 10.4 in.; UL 94-HB Rated 制造商:PacTec 功能描述:ENCLOSURE, DESKTOP, PLASTIC, BLACK; Enclosure Type:Desktop; Enclosure Material:Plastic; Body Color:Black; External Height - Imperial:3.38"; External Height - Metric:86mm; External Width - Imperial:10.4"; External Width - Metric:264mm;RoHS Compliant: Yes
DM-300-C
制造商:Greenlee Textron Inc 功能描述:DMM 1000V RMS
DM-301
制造商:Labfacility Limited 功能描述:SENSOR PT100 THIN FILM 2X2.3MM CL B 制造商:LABFACILITY 功能描述:SENSOR, PT100, THIN FILM, 2X2.3MM, CL B 制造商:LABFACILITY 功能描述:TEMPERATURE RTD SENSOR, -70C to +500C, 100 OHM; Sensing Temperature Min:-70C; Sensing Temperature Max:+500C; Resistance:100ohm; Sensor Terminals:Through Hole; Temperature Sensing Range:-70C to +500C ;RoHS Compliant: Yes
DM30103J
制造商:ELMCO 功能描述:
DM30113G
制造商:n/a 功能描述:DM30X311 S7C8B
DM30-113G
制造商:n/a 功能描述:DM30X311 S7C8B
DM30133J
制造商:n/a 功能描述:DM30X313 S7C8B